If there is FTTH connecting issue check following:
1. Ensure GPON indicator is stable. Blinking indicates means it is trying to connect, so not connected.
2. Ensure Orange and Green light is glowing, this ensures connectivity from device port to your computer/device is OK.
3. Ensure you are using right port. In most of the case it is Eth1 but for some reason it was Eth3 in my case.
1. Ensure GPON indicator is stable. Blinking indicates means it is trying to connect, so not connected.
2. Ensure Orange and Green light is glowing, this ensures connectivity from device port to your computer/device is OK.
3. Ensure you are using right port. In most of the case it is Eth1 but for some reason it was Eth3 in my case.
No comments:
Post a Comment