Sunday, June 26, 2016

BSNL FTTH - Open Modem / Device Settings Page

Recently I got BSNL FTTH installed but I could open device settings page. I prefer device to do connection instead of dialing (PPoE) from computer.

Resolution: You should use Eth1 port.


In my case I had to use Eth3 port for some reason that was cause of issue. I guess Eth3 is used for IPTV.

Here is one more picture of device:


FYI: IP for device settings is 192.168.1.251 so your computer's IP should be in same sub net ( example: 192.168.1.10) to open it. Username: root , Password: admin


No comments: